How to Make R4 Work Again After Ntrboot

ane What's the method for using R4 card to play 3ds games?

The method is called NTRboot Method, this can work because it enables a Custom Firmware similar Luma3ds to run on any 3DS firmware console via using a flashcard and a magnet, and so later that, you can install 3ds games to your console via converting it to .cia file or directly downloading .cia ROM from online.

The NTRboot Method is heavily based on the NTRboothax or magnethax of Nintendo 3DS, which is a costless 3ds exploit to employ for running B9S .firm files from kick ROM via a compatible flashcard and a magnet! This can piece of work on every 3DS&2DS variants with all firmware versions.

All preparations for this method are just an NTRboot compatible flashcart and a maget if our 3DS devices are of a folding style. This is because the exploit requires your device to enter sleep fashion while nonetheless having access to the buttons.

2 Which R4i 3DS work with NTRboot to play 3ds games?

Many flashcarts are compatible with the Ntrboot method, not merely the 3DS R4i cards. But when using whatsoever of them, y'all should go along the following things in listen.

• The R4i 3DS should be compatible with your 3ds firmware version.
• The R4i 3ds should without Timebomb software.
• The R4i 3ds should be installed with firmware or kernel.
• The R4i 3ds can't be used for its standard functions while the NTRboot exploit is installed on it unless you have R4i gold 3ds plus or Ace3ds 10 or you lot remove the exploit.

R4i 3DS cards support NTRboothax

See More:

R4ids.cn

R4i Gold 3DS (RTS): Too known as R4i Golden 3DS, R4i Gold 3DS RTS, R4i Golden 3DS V6.1 R4i Gold and R4i Golden 3DS Deluxe (NOT the white-golden "STARTER" card)
Revisions are earlier than "4" might not be supported.

R4i Gold 3DS Plus: This flashcard does not have to be flashed. At that place is an internal switch to change between DS games and NTRBoot style. Information technology has the revision "NTR boot".

R4isdhc.com

R4i SDHC: Also known every bit R4i(i) SDHC RTS Lite, R4i(i) SDHC Dual-Cadre, R4i(i) SDHC Gold Pro, R4i(i) SDHC Snoopy and R4i(i) SDHC Upgrade.
All cards from this squad with "2014", "2015", "2016", "2017", "2018"and "2019" are supported.

R4i 3DS B9S: This as well comes pre-flashed with NTRBoot as "R4i 3DS B9S". It doesn't matter if the carte has a "games engine" or a "wifi" logo. This card has a timebomb.

R4i-gold.eu

R4i gold EU 3ds: Merely cards with "Touch! Bomberman Land" icon are supported. This is a rebrand of the "R4i 3DS RTS (R4i-sdhc.com)". This card has a timebomb. Unsupported cards might brick when trying to inject NTRBoot.

Guide-How to use R4i card to play 3ds ROMs?

Methods

For flashing NTRboot to a 3DS FW console with compatible R4i 3ds cards, in that location are iv means, they are the 3DS Single method, the 3DS Multi-method, the NDS, and the DSI methods.

1. 3DS Single System: This method requires zero more than your stock unhacked 3DS and a compatible flashcart.
2. 3DS Multi System: This method requires temporary admission to a second 3DS family device that is already running boot9strap.
3. NDS: This method requires temporary access to a Nintendo DS or Nintendo DS Calorie-free that is compatible with your flashcart.
4. DSi: This method requires temporary access to a Nintendo DSi that is compatible with your flashcart.

The First method is the Easiest, no hacked or some other device required and many R4i 3ds tin can support it. And so just prepare a NTRboot R4i card and a magnet for your unhacked 3DS/3DS XL/NEW 3DS 40/NEW 2DS XL panel, and so finish the steps hither, you can go the R4i 3ds card to play costless 3ds ROMs.

Encounter More:

Preparations

• The latest release of SafeB9SInstaller (https://github.com/d0k3/SafeB9SInstaller/releases/latest)
• The latest release of boot9strap (https://github.com/SciresM/boot9strap/releases/latest)
• The latest release of Luma3DS  (https://github.com/AuroraWright/Luma3DS/releases/latest)
• The latest release of the Homebrew Launcher (https://github.com/fincs/new-hbmenu/releases/latest)
• Flashing NTRboot to your R4i with this guide (https://3ds.hacks.guide/flashing-ntrboot-(3ds-unmarried-system)), or if you accept an R4i B9S, R4i GOLD 3DS PLUS, ACE3DS 10, you are no need to do this.

Section I – Prep Work

1. Power off your device
2. Insert your device's SD card into your estimator

• • This is the SD card from your 3DS, not the SD card from your flashcart

1. Re-create SafeB9SInstaller.firm to the root of your SD carte du jour and rename it to boot.house
2. Re-create boot.3dsx to the root of your SD card
3. Create a folder named boot9strap on the root of your SD card
4. Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your SD bill of fare
5. Reinsert your SD carte into your device
6. Power on your device

Department Ii – NTRboot

1. Use the magnet to find the spot on your device where the slumber sensor is triggered

• • This pace is non needed on the erstwhile 2DS (which has a slumber mode switch)

1. Power off your device
2. Insert your flashcart into your device
3. Place the magnet on your device to trigger the sleep sensor

• • On old 2DS, you should instead enable the sleep mode switch

1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons

• • It may accept a few attempts to get this to work considering the positioning is awkward

1. If the exploit was successful, you will have booted into SafeB9SInstaller

Section III – Installing boot9strap

1. Wait for all safety checks to complete
2. Remove the magnet from your device

• • On old 2DS, you should instead disable the slumber mode switch

1. When prompted, input the primal combo given to install boot9strap
2. Once information technology has completed, force your device to power off past holding downwards the power push button

• • Your device volition simply boot to the SafeB9SInstaller screen until the adjacent section is completed

Section IV – Configuring Luma3DS

1. Insert your SD bill of fare into your computer
2. Delete boot.business firm from the root of your SD card
3. Copy kicking.firm from the Luma3DS .7z to the root of your SD carte
4. Reinsert your SD card into your device
5. Power on your device
6. Your device should accept booted into the Luma3DS configuration menu
7. Utilize the (A) button and the D-Pad to plow on the post-obit:

• • "Show NAND or user string in Organization Settings"

1. Press (Start) to salve and reboot

• • If you get an error, but continue the next page

Department Ⅴ – Playing 3DS Roms

1. Download the 3DS game in .cia format from online or ask us in Discord.
2. Put the CIA for the game onto the 3DS SD card.
3. Download FBI, use the FBI to observe the CIA and install it.
4. The 3DS Game will appear on the 3DS menu and play it.

When taking this method to play 3ds games, you should be very careful, there is a risk for bricking your console if you do anything wrong. I have used this way to install ROMs to my console, the end is I spend a whole afternoon merely simply become iii .cia files to download.

So I don't recommend whatsoever 3DS console newbie or a kid to do with this guide. In my opinion, the 3ds flashcard that plays 3DS Games on the consoles is much more than convenient. Merely like the way R4i bill of fare play ds games, the Sky3ds+ or Stargate 3ds flashcards supports 3ds ROMs directly .

I take both the flashcards in hand, each one can be set up up in 5 minutes with simply download .3ds files and kernel to the bill of fare, then I just need to insert the card to 3DS and showtime to play them! No, exploit, no ban and no brick!

iceupout1986.blogspot.com

Source: http://www.tellmehow.co/detail-guide-play-3ds-games-r4i-3ds-card/2/